why hydraulic hose burst
Why Hydraulic Hose Burst
Hydraulic systems are an essential component of many machinery and equipment in various industries. They allow for the transfer of power and force through the use of pressurized fluid. However, despite their importance, one common issue that hydraulic systems face is a burst hydraulic hose. This occurrence can lead to hazardous situations, equipment failure, and costly repairs. In this article, we will explore the reasons why hydraulic hose burst and what can be done to prevent it.
The Role of Hydraulic Hoses
Before diving into the causes of hydraulic hose burst, it is crucial to understand the role of hydraulic hoses in a hydraulic system. Hydraulic hoses are responsible for the transmission of high-pressure fluid to various components within the hydraulic system. They act as a medium for the transfer of power and force from the hydraulic pump to the hydraulic cylinder or motor.
The Causes of Hydraulic Hose Burst
1. Age and Wear
One of the primary causes of hydraulic hose burst is the age and wear of the hose. Over time, hydraulic hoses are exposed to high pressure, extreme temperatures, and other environmental factors that can cause them to deteriorate. The aging process causes the hose material to weaken, making it vulnerable to cracks, tears, and leaks. Additionally, wear and tear can occur when hydraulic hoses rub against other components or when they bend too sharply.
2. Overpressure
Another common cause of hydraulic hose burst is overpressure. Hydraulic hoses are designed to operate within a specific pressure range. When the pressure exceeds the hose's limit, it can result in a catastrophic failure. Overpressure can occur due to a malfunctioning pressure relief valve, a blocked hose, or an operator error.
3. Contamination
Contamination is another factor that can cause hydraulic hose burst. Hydraulic systems are prone to contamination from dust, dirt, and other particles that can enter the system and clog or damage the hose. Contamination can also occur when hydraulic fluids degrade, allowing particles to accumulate in the hydraulic system.
4. Improper Installation
Improper installation of hydraulic hoses can also cause them to burst. When hoses are not installed correctly, they are more prone to kinking, twisting, and rubbing against other components. This can lead to premature wear and tear and eventually hose failure. Additionally, when hoses are not tightened to the correct torque or when incompatible fittings are used, it can cause leaks or even hose disconnection.
5. Chemical Degradation
Another lesser-known cause of hydraulic hose burst is chemical degradation. Some hydraulic fluids contain chemicals that can react with hose materials, causing the hose to break down and fail. Chemical degradation can also be caused by exposure to sunlight, ozone, or other environmental factors.
Preventing Hydraulic Hose Burst
Now that we have explored the causes of hydraulic hose burst, it is essential to discuss how it can be prevented. Here are a few ways to minimize the risk of hydraulic hose failure:
- Implement a regular maintenance schedule to check for signs of wear and tear, contamination, and overpressure.
- Choose the right type of hydraulic hose that is compatible with the fluid, temperature, and pressure of the hydraulic system.
- Ensure that hoses are installed correctly and that the fittings are tightened to the correct torque.
- Use protective sleeves, guards, or clamps to prevent chafing and rubbing against other components.
- Perform regular fluid analysis to check for contamination, acid levels, and other degradation signs.
Conclusion
A hydraulic hose burst can be a dangerous and costly event that can lead to workplace injuries, machinery downtime, and expensive repairs. Understanding the causes of hydraulic hose burst and implementing preventive measures can help minimize the risk of hose failure. A regular maintenance schedule, proper installation, and fluid analysis are key factors to ensure that hydraulic hoses operate safely and efficiently.
.The color is optional, such as black, blue, red, purple, gold, green, or customized according to Pantone color codes.
PASSIONHOSE has mature craftsmanship which can ensure a smooth hand feeling.
The hoses are highly flexible, not kinking when smoking, odorless, and soft touch.
The client sent the detailed request to us, including the dimension, temperature, and pressure. Along with the drawings.
After checking the drawings carefully by our experienced technician, we did a fast response and recommended the most suitable hose.
Then prepared the sample quickly.
After many tests, the client approved the sample and sent us the NDA, and PO.
So, inspecting the inner wall of the special-shaped silicone hose with a smaller inner diameter will be a difficult problem.
We contacted us for the first time in July 2019. In the following period, they sent us many inquiries and consulted us on many technical issues. We are patient to help customers solve one by one, leaving a good impression in their mind.
The time has come to April 2020, the customer sent us an inquiry for a tube, this tube has a high temperature resistance requirement, and the shape is irregular, and the forming of the elliptical cross-section has a high requirement for the production process. The customer said that his existing suppliers could not solve these problems, so he asked us for help.
When we got the drawings, we had a preliminary solution for this product. The first point is the mold, the second point is the material.
1.Because of the irregular and elliptical cross-section of the tube, regular molds can not meet the requirements. So we found a machining center and an engraving machine to ensure the size of the ellipse. Section cutting we also use 3D printing to cut to ensure the length of the product and the flatness of the section.
2.The material is peroxide EPDM used by domestic OEMs. The material performance is very good and can reach the Volkswagen standard. Then the process, product performance, peel strength, and pulse are all very good. This product represents the highest standard of materials such as EPDM.
After many test, report and profiles, customer place an trial order. When customer got this product, they gave the highest evaluation, which perfectly met their needs. Now that the trial order has passed the customer's test, the customer will place a official order soon. We are 100% confident to make official orders perfect!
Passion Hose founded in 2007, a professional silicone hose manufacturer, a brand of pipeline hose and accessories R&D, production and sales. Main products: stainless steel shower hose,hydraulic hose, industrial hose, automotivehose, plumbing hose etc., which are widely used in home, hotel, industry and other fields.
Quick Links
Products
If you have any question, please contact us.
Email: ps1@passioncohose.com
Tel: +86-136-6663-2043
Whatsapp: +86-13666632043
Add: B-101, Hangzhou Smart Industrial Park, No. 857, Wenyixi Rd. Hangzhou, 310030, China