how to replace shower hose on mixer tap | Passionhose

Are you tired of dealing with a leaky shower hose on your mixer tap? It's time to take matters into your own hands and replace it with a new one! In this detailed guide, we will walk you through the process of replacing the shower hose on your mixer tap. Whether you are a seasoned DIY enthusiast or a newbie, this step-by-step guide will help you get the job done in no time. So grab your tools and let's get started!

Step 1: Gather the necessary tools and materials

Before you begin the process of replacing the shower hose on your mixer tap, make sure you have all the necessary tools and materials at hand. You will need a new shower hose, an adjustable wrench, thread seal tape, and a pair of pliers. It's also a good idea to have a bucket or a towel nearby to catch any excess water that may leak out during the process.

Step 2: Turn off the water supply

Before you can start working on replacing the shower hose, you need to turn off the water supply to your mixer tap. Locate the shut-off valves under the sink or behind the shower wall and turn them clockwise to shut off the water. Once the water supply is turned off, turn on the mixer tap to release any remaining water in the pipes.

Step 3: Remove the old shower hose

Use an adjustable wrench to loosen the nut connecting the old shower hose to the mixer tap. Once the nut is loose, use your hands to unscrew it completely and remove the old shower hose from the mixer tap. Be careful not to damage any other components of the tap while removing the hose.

Step 4: Install the new shower hose

Before installing the new shower hose, apply a few wraps of thread seal tape to the threads of the tap to ensure a watertight seal. Screw the nut of the new shower hose onto the tap and tighten it with an adjustable wrench. Make sure the hose is securely attached to the tap to prevent any leaks.

Step 5: Turn on the water supply and test the new shower hose

Once the new shower hose is properly installed, turn on the water supply and test the hose for any leaks. Check for any water drips or leaks around the connections and tighten them if necessary. Once you are satisfied that the new shower hose is installed correctly and without any leaks, you can enjoy a refreshing shower without any worries.

In conclusion, replacing the shower hose on your mixer tap is a simple and straightforward process that can be done in just a few steps. By following this guide, you can save money on plumber fees and ensure that your shower is in top working condition. So don't put up with a leaky shower hose any longer – take action today and replace it with a new one!