how to connect a hose to a shower head | Passionhose

By adding a hose to your shower head, you can enjoy the convenience of a handheld shower experience. Whether you want to easily rinse off your pet, clean the shower walls, or simply have more flexibility while showering, connecting a hose to your shower head can be a great solution. In this article, we will guide you through the process of connecting a hose to your shower head, step by step.

Gather Your Supplies

Before you begin the process of connecting a hose to your shower head, you will need to gather all the necessary supplies. You will need a handheld shower head with a hose, Teflon tape, an adjustable wrench, pliers, and a rag. Make sure the handheld shower head you choose is compatible with your existing shower head system. Additionally, check that the hose length is sufficient for your needs.

Prepare Your Shower Area

To begin the process of connecting a hose to your shower head, you will need to prepare your shower area. Start by turning off the water supply to your shower to avoid any accidents. Place a rag or towel on the shower floor to catch any water that may drip during the process. If you have a shower curtain, make sure to pull it back to allow for easier access to the shower head.

Remove the Existing Shower Head

Next, you will need to remove the existing shower head to make way for the new hose attachment. Use an adjustable wrench to loosen the shower head by turning it counterclockwise. You may need to use pliers to fully remove the shower head if it is stuck. Be careful not to damage the shower arm while removing the shower head. Once the shower head is removed, clean the shower arm with a rag to remove any debris or leftover Teflon tape.

Apply Teflon Tape

Before installing the new hose attachment, it is essential to apply Teflon tape to the shower arm threads. This will create a watertight seal and prevent any leaks. Start by wrapping the Teflon tape around the threads in a clockwise direction. Make sure to overlap the tape as you go to ensure a secure seal. Once the shower arm threads are fully covered in Teflon tape, use your fingers to press the tape into place.

Attach the Hose and Shower Head

Now it is time to attach the hose and shower head to the shower arm. Screw the mounting nut of the hose attachment onto the shower arm threads in a clockwise direction. Use an adjustable wrench to tighten the mounting nut securely, but be careful not to overtighten it. Attach the handheld shower head to the other end of the hose by screwing it on in a clockwise direction. Ensure that the connection is secure to prevent any leaks.

In conclusion, connecting a hose to your shower head is a simple yet effective way to enhance your shower experience. By following the steps outlined in this article, you can easily install a handheld shower head with a hose attachment in your shower. Enjoy the added convenience and flexibility that a hose attachment brings to your daily shower routine.