how to change hydraulic hose on kubota tractor


How to Change Hydraulic Hose on Kubota Tractor


Maintaining the hydraulic system on your Kubota tractor is essential for its optimal performance. One critical aspect of this maintenance is being able to change the hydraulic hose when necessary. Over time, hydraulic hoses can wear out, develop leaks, or become damaged due to various reasons. In this guide, we will walk you through the step-by-step process of changing the hydraulic hose on your Kubota tractor, ensuring that you can keep your equipment running smoothly.

I. Assessing the Situation:

Before diving into the process of changing the hydraulic hose, it is important to assess the situation and understand why the hose needs replacement. Look for signs such as leaks, cracks, or bulges in the hose. These are indicators that the hose is worn out or damaged and should be replaced promptly.

II. Gathering the Necessary Tools:

To successfully change the hydraulic hose on your Kubota tractor, you will need to gather a few tools. Some of the essential tools include:

1. Wrenches: These will be used to remove and tighten the fittings on the hydraulic hose.

2. Safety Glasses: Protect your eyes from any hydraulic fluid splashes or debris while working.

3. Safety Gloves: Ensure the safety of your hands throughout the process.

4. New Hydraulic Hose: Make sure to have the correct replacement hose for your specific Kubota tractor model.

III. Preparing the Tractor:

Before you start replacing the hose, it is important to turn off the tractor's engine and relieve any hydraulic pressure in the system. You can do this by moving the hydraulic control levers back and forth several times to ensure that the pressure is released.

IV. Removing the Old Hose:

To remove the old hydraulic hose, follow these steps:

1. Locate the fitting that connects the hose to the tractor's hydraulic system.

2. Use a wrench to loosen and remove the fitting from the hydraulic system.

3. Once the fitting is removed, carefully detach the hose from the system, taking note of its route and any fasteners or clamps that secure it in place.

4. If the hose is stuck or difficult to remove, applying a small amount of penetrating oil on the fitting can help ease the process.

V. Installing the New Hose:

After removing the old hydraulic hose, it's time to install the new one:

1. Ensure that the new hose is the correct length and has the same fittings as the old one.

2. Carefully route the new hose along the same path as the old hose, ensuring it is secure and free from sharp bends or potential damage.

3. Slide the fittings onto the hose and tighten them with a wrench, ensuring they are snug but not over-tightened.

4. Reattach the hose to the tractor's hydraulic system, securing it with fasteners or clamps as necessary.

VI. Testing the System:

Once the new hydraulic hose is installed, it is crucial to test the system before resuming regular operation:

1. Slowly start the tractor's engine and engage the hydraulic system.

2. Check for any leaks or abnormalities in the hose connections, fittings, and hydraulic system.

3. Monitor the hydraulic system for a while, making sure that everything is functioning properly and there are no signs of leaks or issues.


Knowing how to change the hydraulic hose on your Kubota tractor is a valuable skill that allows you to maintain your equipment effectively. By following the step-by-step process provided in this guide, you can replace a worn-out or damaged hydraulic hose, ensuring the longevity and performance of your Kubota tractor's hydraulic system. Remember to always prioritize safety precautions and thoroughly test the system before putting it back to work.


Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English